22 Series Turbo-Flotm Probe

Here is an easy to install insertion meter with turbine meter accuracy. The low mass non-metallic turbine rotates in direct proportion to fluid velocity and can provide local flow rate and total information with no external power required. 4-20 mA signal outputs are also available for control and automation functions. The 22 Series probe has its own integral screw jack mechanism for "hot tap" insertion through a 1.5 inch full port ball valve at pressures up to 400 psig. By rotating the crank handle at the top of the probe, the turbine is lowered through the open ball valve into the stream. What an improvement over the "tighten down nuts on three threaded rods in rotation" method! This instrument is ideal for periodic sampling or permanent installation. It is often used as a flow prover for other metering devices in large line sizes. Series Description Applications Functions Features Materials Pressure Limits Temperature Limits Pipe Sizes 22 Hot tap turbine probe Water (aqueous solutions) Flow rate Totalize flow Screw jack mechanism Use for large pipe sizes Survey or flow profile 304 sst 400 psig 225ºF 1-1/2" to 72"   Back to Turbo-Flotm Selection Guide

	ERDCO Engineering Corporation
	800.553.0550 toll-free in US and Canada Telephone: 847.328.0550 Fax: 847.328.3535 721 Custer Avenue Evanston, IL 60202 USA e-mail: info@erdco.com